Differences

This shows you the differences between two versions of the page.

--- desktop:custom_strategies [2025/03/27 19:47] – [Quote Snapshot] rob
+++ desktop:custom_strategies [2025/03/27 20:15] (current) – [T4 Custom Strategies Calculations] rob
@@ Line 162: / Line 162: @@
 To start a new strategy from scratch, click Create New (3) on the right side. To build a strategy based on one of the existing templates, click the desired template followed by New From Template (4). Both of these buttons will open the Strategy Editor.
-Image
+{{:desktop:ts-qs-002.png|}}
 Within the Spread tab (1) of the Strategy Editor, give the new strategy a name in the Description box (2). Then click the Legs tab (3) to configure the legs of the strategy.
-Image
+{{:desktop:ts-qs-003.png|}}
 Click the Add New Leg button (1) to add the first leg of the strategy. Repeat this step until all legs have been added. If just two legs are chosen and both legs are of the same product, the Market Generation Mode (2) will need to be changed to Sequential Calendar Expiries, or the Fixed Market dropdowns (3) will need to be changed to specify the desired expirations for each leg. Next choose whether each leg is being bought or sold by changing the Leg Side dropdown (4). If you plan on executing orders through the Custom Strategies be sure to adjust the Trade Ratio (5) to reflect the number of contracts of each leg you would like to buy or sell for each 1 lot placed in the strategy. Changing this factor will not change how the price of the strategy is calculated. Instead, adjust the Leg Multiplier (6) to change the price calculation. For example, if a particular strategy is quoted by multiplying the first leg’s price by 2 and subtracting the second leg’s price as-is, the first leg would have a leg multiplier of 2 while the second leg would remain at 1. Once the parameters have been set, click the Create/Update button (7) to save the strategy or click the Cancel button (8) to return to the Custom Strategies window without saving.
 When setting up your spread there are more options to better configure your spread for a more indepth break down of category's such as Leg Slop, Leg Payup, Leg Order type, Leg Order type, Snipe, Volume multiplier, and Reverse Strategy you can go to the Strategy Editor-Legs Tab.
-Image
+{{:desktop:sniper_quick_start_legs.png|}}
 After a custom strategy has been created, it can be edited by selecting it and clicking the Edit button (1). To trade or see quotes for a strategy, select it from the Custom Strategies window then click the Trade/Quotes button (2). To open other windows for the selected strategy, click Chart (3), Market Profile (4), or Market History (5). The Spread Matrix (6) button will provide the option to open a spread matrix window for any of the legs of the selected strategy. The Quote Snapshot (7) will provide detailed information that breaks down the spread quotes into the constituent leg quotes and volumes for each depth level.
-Image
+{{:desktop:ts-qs-005.png|}}
 Within the contract window for a custom strategy, the dropdown menu (1) will contain three new features. Leg Contracts (2) will open additional contract windows for each of the legs of the strategy. Snapshot Quote (3) will open a new window that breaks down the spread quotes into the constituent leg quotes and volumes for each depth level. The Strategy Definition button (4) will open a view-only version of the Strategy Editor to display the complete strategy configuration at a glance.
-Image
+{{:desktop:ts-qs-006.png|}}
 Upon logging out of T4, if you have any orders working in the Custom Strategies you will be asked if you would like to save them for your next session. If you choose yes, the next time you login you will see the Saved Strategy Orders window on top of the other windows in your workspace. You can check any orders you would like to resubmit (1), then click the Submit Checked button (2) to put the orders back in the Custom Strategies or the Cancel button (3) to discard them. Any orders that would be filled instantly upon resubmitting will have a yellow background (4) behind the order type field. After either submitting or cancelling the orders they will be permanently removed from the server and will need to be manually resubmitted if desired after that point.
-Image
+{{:desktop:ts-qs-007.png|}}
-Image
+{{:desktop:ts-qs-008.png|}}
-Image
+{{:desktop:ts-qs-009.png|}}
 ====== T4 Custom Strategies Calculations ======
-Inputs	Description
-Ticks	This is the price of the product as published by the exchange. Note that this value may not match the display price.
-TickValue	This is the cash value of a minimum tick for the product multiplied by the leg multiplier chosen for that leg, i.e. a leg multiplier of 3 with a $10 minimum tick creates a $30 TickValue.
-Numerator	The minimum tick increment in the same terms as the "Ticks" of the product, i.e. a display price of 1170.3 may have a minimum tick of 0.1, but if the Ticks are published by the exchange as 11703, the Numerator will be 1, not 0.1
-Denominator	The value sent from the exchange that divides into Ticks to create a decimal value.
-PriceCode	If applicable, this applies a special conversion to a decimal value to create a more legible display price, i.e. a 10yr Note decimal price of 127.296875 becomes 127095 after applying the appropriate PriceCode.
-DisplayFormat	The decimal precision applied to a display price, i.e. a price of 1258.75 with a DisplayFormat of 0.0 will truncate the last digit, leaving 1258.7 as the display price
-Edit
+^ **Inputs**                      ^ **Description**  ^
-Cash Calculation¶
+|**Ticks**	|This is the price of the product as published by the exchange. Note that this value may not match the display price.|
-Step 1 - Multiply each leg price by its TickValue and Denominator, then divide by its Numerator.
+|**TickValue** |This is the cash value of a minimum tick for the product multiplied by the leg multiplier chosen for that leg, i.e. a leg multiplier of 3 with a $10 minimum tick creates a $30 TickValue.|
-Step 2 - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
+|**Numerator** |The minimum tick increment in the same terms as the "Ticks" of the product, i.e. a display price of 1170.3 may have a minimum tick of 0.1, but if the Ticks are published by the exchange as 11703, the Numerator will be 1, not 0.1 |
-Step 3 - Multiply the value derived in Step 2 by the first leg's Numerator, then divide by the first leg's TickValue and Denominator.
+|**Denominator** |The value sent from the exchange that divides into Ticks to create a decimal value. |
+|**PriceCode** |If applicable, this applies a special conversion to a decimal value to create a more legible display price, i.e. a 10yr Note decimal price of 127.296875 becomes 127095 after applying the appropriate PriceCode.|
+|**DisplayFormat** |The decimal precision applied to a display price, i.e. a price of 1258.75 with a DisplayFormat of 0.0 will truncate the last digit, leaving 1258.7 as the display price. |
+__**Cash Calculation**__
+  * **Step 1** - Multiply each leg price by its TickValue and Denominator, then divide by its Numerator.
+  * **Step 2** - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
+  * **Step 3** - Multiply the value derived in Step 2 by the first leg's Numerator, then divide by the first leg's TickValue and Denominator.
+__**Decimal Calculation**__
+  * **Step 1** - Multiply each leg price by its leg multiplier.
+  * **Step 2** - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
-Edit
+__**Tick Calculation**__
-Decimal Calculation¶
+  * **Step 1** - Multiply each leg price by its leg multiplier and Denominator.
-Step 1 - Multiply each leg price by its leg multiplier.
+  * **Step 2** - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
-Step 2 - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
+  * **Step 3** - Divide the value derived in Step 2 by the first leg's Denominator.
-Edit
-Tick Calculation¶
-Step 1 - Multiply each leg price by its leg multiplier and Denominator.
-Step 2 - Add all leg values calculated in Step 1, where buy-side legs are positive and sell-side legs are negative.
-Step 3 - Divide the value derived in Step 2 by the first leg's Denominator.
-Edit
+__**Yield Calculation**__
-Yield Calculation¶
 The yield calculation is the same as the cash calculation, but the quotes are displayed as yield instead of price. The yield calculation is only available for treasury products.